Prepared for bolt-down
This cabinet is prepared for bolt-down through pre-drilled holes (which is a prerequisite for all light weight insurance company approved safes). Powerful expander bolts and instructions describing how to bolt-down the cabinet is provided with the safe.
Protects against full fire for 1 hour
In addition to strong anti-theft protection, your documents and valuables are protected against intense fire for 60 minutes. The cabinet is tested in about 1000 degrees of external heat for 60 minutes.
Pre-installed electronic code lock included in the price!
In order to ease the use of the safe or e.g. avoid unwise hiding of cabinet keys, the cabinet is equipped with a battery-powered electronic keypad code lock from start. The code lock is powered by a 9 volt battery that you can easily replace from the outside of the cabinet. You set your own 6 digit code with help of a detailed instruction manual in english (or Swedish). The manual is of course provided with the safe.
Find your size of GR safe
The GR-value cabinets come in six different sizes, all with the same solid theft and fire protection. The external dimensions of the different cabinets are (HxWxD):
GR46E - 490x480x445 mm
GR67E - 670x480x445 mm
GR75E - 750x555x545 mm
GR95E - 980x545x445 mm
GR133E - 1336x704x581 mm
GR165E - 1653x704x581 mm
You can find all high security value safes in the GR series under ->
Value safes ->EN1143-1 rated safes. Grade I or by clicking on one of the article numbers above.
Note about the code lock!
By changing code and digits occasionally (e.g. 3-5 times a year) you will increase the level of security immensely. On the one hand by decreasing the risk of unauthorised getting hold of the right code, and on the other hand by avoiding potential unequal wear of the keypad buttons.
When it comes to keypad code locks, there is a risk that the keypad buttons gets worn so that some numbers will be unreadable. Such unequal wear may also make it easy for unauthorised to figure out which numbers are included in the code, unless there is an even wear of the buttons. Therefore, we recommend that everyone who purchases cabinets with electronic code locks change codes / numbers at least 3-5 times a year.
Protect your Harddrives, CD/DVDs, USB sticks
By adding the BBD0500 fire chest with fire protection for data media (e.g. external hard drives, memory cards, CD/DVD, USB sticks) and keeping it in your safe you get a very wide range of fire protection, that covers more than your important documents and similarly heat tolerant items. You can order a fire chest under accessories below, or take a look at all our fire chests under the
Fire chests category to the left.
Nice design
Design and finish consist of an impact-resistant gray stylish structure lacquer.
Don't forget the accessories under the accessories tab By adding your preferred accessories you can make the cabinet more suited to your specific needs.
External dimensions, H x W x D:
670 x 480 x 445 mm
+ 30 mm depth due to the hinges
Internal dimensions, H × W × D:
510 × 332 × 290 mm
Weight:
131 kg (ought to be bolted to a floor)
Volume:
49 liter
Fittings:
1 (re)movable shelf
Lock system:
Electronic keypad code lock
Burglary protection:
EN 1143-1 Grade I
Fire protection:
LFS 60 P, EN 15659